Engineering lettering Pencil Techniques * The best pencils for lettering on most surfaces are the H, F, and HB grades.
* Hold your pencil in the position shown. It should make approximately a 60o angle with the paper. Pencil Lead Designation Freehand Lettering * Developing good lettering is a personal skill which takes practice. Letters must be formed properly. * They must be open shaped very legible. Clear communication is essential to avoid mistakes and reduce waste. * Lettering may be done using a drafting type pencil, lead holder or technical pen.
Engineering Lettering Essay Example
Which ever tool is used, the letters must properly formed and very black * Pull the pencil or pen across the paper. All lettering strokes should be a pulling motion. * Right-handed and left-handed drafters may have to develop different styles for forming letters * Press down hard when using a pencil. Vertical capital letters are preferred for most technical work. They are formed within a 6 by 6 grid. Straight Line letters Most letters are slightly narrower than they are tall. The shapes of the letters are as open as possible.
Letters with small loops and crossing strokes are avoided This sequence is recommended to assure that each letter is the correct width in relation in height. For example, form the two vertical sides of the “H”, “N” and “M” first. Form the top of the “T” first. * The “H” and “N” are slightly narrower than they are tall. * The “T” and the “M” are just as wide as they are tall Note: Proportion: width vs. height is very important in forming letters. Lettering – Vertical Gothic Font Practice Engineering Lettering Practice Strokes