The Gravity Bong Essay Research Paper The

8 August 2017

The Gravity Bong Essay, Research Paper

The Gravity Bong

I was introduced to the gravitation bong by a friend. He told me the full name

as described to him was the & # 8220 ; Afghanistan Gravity Bong & # 8221 ; . We were sitting about

one dark and decided to seek one out.

While I could travel into item refering the mechanics of the bong & # 8217 ; s

operation, I don & # 8217 ; t believe that is truly necessary. The ground it is called a

& # 8220 ; gravitation bong & # 8221 ; and non something else is this is what person called it, that is

how they described it to their friends, and now it is an recognized term for the

following apparatus. I have observed some people on the net reasoning about gravitation

vs. force per unit area vs. whatever. If you have remarks wish this as a consequence of this

description, I refer you to: alt.engineering.geeks. The type of statement I have

observed would hold been halted a long clip ago by declaring a & # 8220 ; TECH TIME OUT

! ! & # 8221 ; at our school.

We will write a custom essay sample on
The Gravity Bong Essay Research Paper The
or any similar topic specifically for you
Do Not Waste
Your Time
HIRE WRITER

Only $13.90 / page

Take a hit adult male. I feel better now holding said all that,

so & # 8230 ; on with the of import material & # 8230 ;

GRAVITY BONG OPERATION:

Measure 1:

Topographic point the bottomless bottle into a H2O beginning such as a pail of H2O,

sink, bathing tub, larger bottle, fishtank ( merely pull the leg ofing ) , etc & # 8230 ; When the bottle

remainders on the underside, the oral cavity piece should be above the H2O degree plenty to

clasp the bottle. I & # 8217 ; m non certain if warm or cold H2O is best, or even if it makes

much difference seeing as the fume is non bubbled through it.

Measure 2:

Pack the bowl and topographic point it on the oral cavity of the bottle.

Measure 3:

SLOWLY! ! pull the bottle out of the H2O, while illuming the bowl. The

herb should truly fire and the fume will look intimidating. Stop when: a ) the

herb is all ash ( preferred ) , or B ) when the underside of the bottle is still an

inch or so below the H2O degree in the pail. Get down fixing yourself for a

immense hit.

Measure 4:

CAREFULLY take the bowl without allowing the bottle move downward ( up a

small is all right, but don & # 8217 ; t lwt the bottom come out of the H2O ) , exhale deeply,

and put your oral cavity over the gap. Inhale rapidly and wholly, leting

your caput to travel downward. Try non to imbibe any bong H2O as this sort of

suctions! ( although its like larning to swim, it & # 8217 ; s bound to go on a small ) .

Measure 5:

Don & # 8217 ; t cough and bent on tight!

PACKED

BOWL & gt ; & gt ; $ $

I I I/I BOTTLE & gt ; & gt ; / BOTTLE

& gt ; & gt ; /

/ /

| / | | / |

|~~~~|~~~~~~~~~~|~~~~| |~~~~|~~~~~~~~~~|~~~~|

|~~~~|~~~~~~~~~~|~~~~| |~~~~|~~~~~~~~~~|~~~~|

|~~~~|~~WATER~~~|~~~~| |~~~~|~~WATER~~~|~~~~|

|~~~~|~~~~~~~~~~|~~~~| |~~~~|~~~~~~~~~~|~~~~|

|~~~~|~~~~~~~~~~|~~~~| |~~~~|~~~~~~~~~~|~~~~|

__________________/ __________________/

BUCKET BUCKET

Measure 1 Measure 2

/ = BOWL

% $ $ = HERB

LIGHTER __ * % ** = LIGHTER FLAME

& gt ; & gt ; |__| @ **

$ $ SUCK

/ I/I ||

|| / . . || I..I

|| / . . . || / . .

|| / . . . . / / . . .

| . . . . . | / . . . . BOTTLE & gt ; | SMOKE |

| . . . . . |

| . . . . .| | . . . . .|

| |~~~~~~~~~~| | | |~~~~~~~~~~| |

|~~~~|~~~~~~~~~~|~~~~| |~~~~|~~~~~~~~~~|~~~~|

|~~~~~~~~~~~~~~~~~~~~| |~~~~|~~~~~~~~~~|~~~~|

|~~~~~~~WATER~~~~~~~~| |~~~~~~~~BONG~~~~~~~~|

|~~~~~~~~~~~~~~~~~~~~| |~~~~~~~~WATER~~~~~~~|

|~~~~~~~~~~~~~~~~~~~~| |~~~~~~~~~~~~~~~~~~~~|

__________________/ __________________/

BUCKET BUCKET

Measure 3 Measure 4

THE Design:

First Test:

First, a 2-liter bottle and a

suited pail were obtained from the

flat. I cut the underside off the 2-liter bottle and put it aside. I was

able to happen a twosome of prison guard on caps, one of which was of the metal assortment.

I cut a unsmooth hole in each, and glued them together, with the cup sides confronting

out. Into the side with the metal cap, a piece of screen was placed and fit

existent nice. We were forced to construct this small thing because we didn & # 8217 ; Ts have a

bowl Handy.

This worked all right, but rather a spot of air flowed in for the measure of herb

which was consumed. Besides, it was a hurting to unscrew the cap after raising the

bottle. Overall, we all ended up holding a great clip and the first test was

still a success. I leave this historical description in here because: a ) this

may be a good sufficiency system for you, or B ) you are besides in a pinch for something

right off as we were!

Second TRIAL:

Having decided the activity was fun plenty to justify farther development of

the gravitation bong, and holding entree to a machine store, I designed a bowl merely

for this intent. This incorporates a nice sized burn chamber ( about =

to 5 chiropteran hits from a little chiropteran ) , a little screen, and an o-ring seal to forestall

air from go throughing anything but the combustion herb. It drops out a reasonably brawny ash

after each hit.

Here is a horizontal study of my gravitation bowl design:

FITS ___

IN ____O| _______

BOTTLE & gt ; & gt ; / __________/ _____|

| |+

| / + & gt ; & gt ; & gt ; | +

| __________ |+____

____ / _______|

O-RING & gt ; & gt ; O|___/ BURN

Chamber

You could do the dimensions to whatever you think may work best. I put a

1/4 in. hole through the bowl, with a 3/8 Defense Intelligence Agency. fire chamber that is.400 in.

deep. It fits nicely inside a 35mm movie case shot for storage and TRANSPORTATION

to parties ( no programs to construct more, though several friends have already tried

imploring! ) .

This new bowl works really good and Burnss rather efficienty, make fulling the bottle

with heavy fume. The lone alteration I have made to the setup is to offer the

option of a milk jug in topographic point of the 2-liter bottle, with a plastic arranger

atached to the jug which makes the oral cavity the same size as a 2-liter bottle.

I built my apparatus some clip ago, but the other twenty-four hours person on the net

mentioned utilizing a tuba mouthpiece. Not a bad thought. Besides, people have said they

used aluminium foil with holes poked in it. The point is to acquire a batch of firing

done without utilizing an overly big volume of air.

TRIAL THREE:

This has non been done yet, but the program is to plan a multi-user apparatus

utilizing a larger H2O bottle ( like the Poland Springs ) .

Tip:

To acquire truly wacked, breath back into the bottle, leting it to lift back up

to the beginning of measure 4, and inhale once more. Make non nevertheless, deprive yourself

of excessively much O. I used this method and took a full minute to take the hit,

external respiration in and out, and was instantly wacked, remaining that manner for several

hours from one hit!

Have a & # 8220 ; Gravity Party & # 8221 ; with many friends & # 8211 ; lotso merriment!

Some people like to force the bottle to the underside, and so inhale. While this

does move to force the fume into your lungs ( sort of like take a breathing in a balloon ) ,

I don & # 8217 ; t truly experience it is any faster. If you try this, wear & # 8217 ; t displace so much

H2O that the pail overflows.

If it is your first clip seeking the system, make some test tallies without packing

the bowl and illuming it. This is a must for a first clip user from the point

of position of hazard decrease ( won & # 8217 ; t opportunity losing cherished fume ) .

How to cite this essay

Choose cite format:
The Gravity Bong Essay Research Paper The. (2017, Aug 08). Retrieved April 18, 2019, from https://newyorkessays.com/essay-the-gravity-bong-essay-research-paper-the-essay/
A limited
time offer!
Get authentic custom
ESSAY SAMPLEwritten strictly according
to your requirements